Patch of red lights Xbox 360 easy - its Xbox 360 1 red lights repaired time guide

This is an article for correction of Xbox 360 red lights and it will show you the:

-the cause of Xbox 360 red lights

-Xbox 360 red light what solution does not work

-How to make a correction of Xbox 360 safe and permanent red light

The cause of Xbox 360 red lights

Heat! The cause of Xbox 360 red lights is the heat.

As the plate heats up, begins to flex. This bending action causes a loosening of the GPU (graphics processing unit). Once released the GPU, it freezes his Xbox 360 and have the Red Ring of death.

What solution of Xbox 360 red light does not work?

There is a rumor on the internet. This rumor says that you can correct the errors of red light of Xbox 360 by adjusting your system in a towel (while it is in). It is assumed that your system overheating.

To be fair, this technique works... for a while. Every time you do so however your system will get worse and worse, and that become a permanent a temporary problem. Know this: 94 per cent of the Xbox 360E with the Red Ring of death does not need new parts - only a little need to adjust for them to work.

If you use heat in the system inappropriately (i.e., wrapping the system in a towel) runs the risk of permanent damage.

How to make a correction of red lights Xbox 360 safe and permanent

Yes, it is very frustrating to have errors of red light. The system hangs at the worst moments, and unable to enjoy the game.

This Xbox 360 red lights fix is permanent and secure, but it is highly suggested that you get a professional guide Xbox 360 repair as it will have videos. Step by step videos will make the process much easier.

The materials you need are: drivers of screw, Arctic composite thermal Silver (found at any computer store for only $1 more or less), rubbing alcohol and some nylon washers.

Here is how a permanent solution of Xbox 360 red lights:

1. To the front and cover plate

2. Extract the motherboard

3 Unscrew the X-abrazadera add 2 nylon washers for screws, brings back the screws

4 Unscrew the fan heatsink and add 2 washers of nylon in each hole. Also, put 2 nylon washers on the screws and heatsink of screw in

5 Clean the GPU and CPU with rubbing alcohol and a Q-Tip (shines up)

6 Thermal compound wall of the Arctic in the CPU and the GPU

7. Apply heat to the CPU and the GPU for 30 seconds

8 Turn on the device and wait 15 minutes after you turn off

9 Put together again

Once they have permanently fixed his errors of red light, the system will no longer freeze on. In the very off chance that never happens again, just repeat this process (and add a washer or 2).

Now know that the cause of the Xbox 360 red ring of death and they know how to fix it. You must extract a professional Xbox 360 repair Guide and it will guide you through the process step by step.

The best of a home red lights of Xbox 360 correction is that it saves about $100 and you can do in an hour or less (once you have the tools and the thermal compound Arctic Silver).

Not be prisoner by Xbox 360 red lights already! Return to the care-free game! Good luck with your Xbox 360 red lights solution!